Whirlpool KEHU309SSS Complete Installation, Check Operation of Lower Oven, 8304536A

Models: KEHU309SSS

1 8
Download 8 pages 51.39 Kb
Page 8
Image 8
Complete Installation

5.On some models, the oven vent is taped to the side of the oven.

With one #8-14 x ³⁄₈" screw for each side of the vent, fasten vent securely to the oven.

A

B

A. #8-14 x ³⁄₈" screw

B. Oven vent

6.Replace oven racks.

7.Replace oven door(s) by inserting ends of hinges into hinge slots in the oven frame.

8.Push hinges in as far as they will go and open the oven door. You should feel the oven door drop into place.

9.Rotate both hinge latches back to the locked position.

10.Check that the door is free to open and close. If it is not, repeat the removal and installation procedures. See “Remove Oven Door” section.

11.Reconnect power.

12.Display panel will light briefly, and “PF” should appear in the display.

13.If display panel does not light, please reference the “Assistance or Service” section of the Use and Care Guide or contact the dealer from whom you purchased your oven.

Complete Installation

1.Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped.

2.Check that you have all of your tools.

3.Dispose of/recycle all packaging materials.

4.For oven use and cleaning, read the Use and Care Guide.

Check Operation of Lower Oven

1.Turn power on.

2.From the Main Menu touch STEAM COOK.

3.Touch AUTO STEAM.

4.Touch VEGETABLES.

5.Touch START, then OK.

If oven(s) does not operate, check the following:

Household fuse is intact and tight; or circuit breaker has not tripped.

Electrical supply is connected.

See “Troubleshooting” section in the Use and Care Guide.

6.When oven has been on for 10-15 minutes, open the oven door, look for water vapor escaping and feel for heat.

If you do not see water vapor or feel heat or if an error code (“F” followed by a number plus “E” followed by a number) appears in the display, turn off the oven and contact a qualified technician.

7.Touch OFF.

Check Operation of Microwave Oven

1.Fill a microwave-safe container with 1 cup (250 mL) of water and place container inside microwave oven. Close door firmly.

2.From the Main Menu touch MANUAL METHOD.

3.Touch MANUAL COOK.

4.Set microwave oven cook time to “2:00” minutes.

5.Touch START.

If microwave does not operate, check the following:

Household fuse is intact and tight; or circuit breaker has not tripped.

Electrical supply is connected.

See “Troubleshooting” section in the Use and Care Guide.

When display reads “1:00” minute, open microwave oven door. The microwave should stop cooking. Close door firmly. The interior microwave oven light should turn off.

6.Touch CONTINUE to resume preset cycle. The microwave oven should begin cooking, and the microwave oven interior light should be on.

Let microwave oven complete cooking time. Tones will sound at the end of the cooking time, and the microwave oven will shut off.

7.Open microwave oven door and slowly remove container. Water in container should be hot.

To set the clock and other oven functions, refer to the Use and Care Guide.

If you need Assistance or Service:

Please reference the “Assistance or Service” section of the Use and Care Guide or contact the dealer from whom you purchased your built-in oven.

8304536A

© 2007. Whirlpool Corporation.

5/07

All rights reserved.

Printed in U.S.A.

Page 8
Image 8
Whirlpool KEHU309SSS Complete Installation, Check Operation of Lower Oven, Check Operation of Microwave Oven, 8304536A