Lint screen
Clean the lint screen before each load. A screen blocked by lint can increase drying time and may be a FIRE HAZARD.
Open the lid and pull the lint screen
straight | out. |
|
|
|
|
|
| DO | NOT run | the dryer with | |||
| the | lint | screen | loose, |
| |
e’9 | damaged | or | missing. |
| ||
Doing | so can | cause | over- | |||
heating, | can | damage |
| fabrics | and | |
can be a FIRE HAZARD.
ROLL the lint off the gcreen with your fingers.
DO NOT rinse or wash the screen.
Push the screen firmly back into place.
Lint removal
Lint can gather inside the dryer and create a fire hazard.This lint
should be removed every 2 to 3 years, or more often, depending on dryer usage.
ELECTRIC DRYERS | ” &AS DRYERS |
Cleaning should be done
l Avoid electrical shock hazard - unplug power supply cord or turn off
electrical power.
l Avoid injury or damage - do not put hands inside cabinet.
l Make sure dryer is cool.
only by a qualified person.
1.Remove back panel (electric) or front panel (gas).
2.Avoid damaging wiresther- mostats, funnel or igniter.
3.Remove lint from shaded area - see art - with a soft brush or vacuum cleaner.
4.Replace panel, reconnect and re- level dryer.
6
