Surface Burners

I
TYPICAL TOP BURNER
FLAME
Lift up the cooktop, following the instructions on page 13.
Wipe off surface burners with warm soapy water and a soft cloth after each
use.
Occasionally check surface burner flames for size and shape as shown. If
flames do not burn properly, you may need to remove the surface burners for
cleaning (see page15) or call a qualified technician for burner adjustments.

The Oven Door

Removing the oven door will make it easier to clean the oven.
Burn and Electrlcal Shock Hazard
Make sure all controls are OFF and the oven Is
cool before removing oven door. Fallure to do
so can result In burns or electrlcal shock.
1.
Open the door to the first stop
position.
2. Hold the door at both sides and lift
off of hinges at bottom corners of
door.
3. lo replace, fit the bottom corners
of the door over the ends of the
hinges.
Push the door down evenly. The
door will close only when it is on
the hinges correctly.

Standard Oven Cleaning

The Standard Oven has to be hand cleaned. Use warm soapy water and
steel wool pads or a commercial oven cleaner. See “Cleaning Chart” for
further instructions.