Whirlpool lSF034PEW manual Using your range, Using the Surface Burners, Surface Burner Indicators

Models: lSF034PEW

1 24
Download 24 pages 55.4 Kb
Page 7
Image 7
Using your range

Using your range

OVEN

RIGHT FRONT

OVEN LIGHT 1

TEMPERATURE

CONTROL KNOB

SWITCH

CONTROL \

\

\

RIGHT REAR CONTROL KNOB

CONTROL KNOB CONTROL KNOB INDICATORS

Using the Surface Burners

This range is equipped with electronic ignitors. Electronic ignitors automatically light the burners each time they are used.

Control knobs must be pushed in, then turned to LITEposition. The click- ing sound is the ignition sparking.

Tostop the clicking sound after the burner lights, turn the control knob back to a desired setting. The control knob has stops for HI, and LO, however it can be set anywhere be- tween HI and LO.Do not cook wlfh the control In the LITEposltlon.

Surface Burner Indicators

The solid dot in the surface burner indicator shows which surface burner is turned on by that knob.

Bum, Fire and Exploslon Hazard

l Burner flame should not extend beyond the edge of the cooklng utensll. The flame can burn you and cause poor cooklng resutts.

l Be sure all control knobs are turned to OFF when you are not cooklng. Someone could be burned or a fire could start If a burner Is acoldentally lefl ON.

*If the flame should go out while cooking, or If there Is a strong gas odor, turn the burners OFF. Walt flve mlnutes for the gas odor to disappear, before rellghtlng burner. If gas odor Is still present, see safety note on page 3. Failure to follow these precautions could result In exploslon or fire.

mDo not attempt to light the oven burner durlng a power failure.

1Personal InJury could result. continued on next page ~

Page 7
Image 7
Whirlpool lSF034PEW manual Using your range, Using the Surface Burners, Surface Burner Indicators