INSTALLATION INSTRUCTIONS

REMOVING AND REPLACING THE MICROWAVE OVEN (CONT.)

To replace:

1.Carefully lift microwave oven and hang it on the support tabs at the bottom of the mounting plate.

2.Rotate the front of the microwave oven cabinet downward. Thread the power supply cord through the power supply cord hole in the bottom of the upper cabinet.

3.Rotate the microwave oven towards the cabinet. Push the microwave oven against the mounting plate until locking pins snap into the cabinet.

wWARNING

Crush Hazard

Attach microwave oven with bolts as shown.

Failure to do so can result in broken bones, cuts, or other injury.

4.Replace the two bolts securing the microwave oven to the upper cabinet.

5.Untape the door and replace the turntable and support.

6.Replace the vent grille.

7.Replace the two screws in the top of microwave oven cabinet (the screws located closest to front corners).

8.If filters were installed, replace them (see “Install- ing and caring for the filters” in the “Caring for Your Microwave Oven” section, if needed).

9.Plug in microwave oven or reconnect power.

2 bolts

8

Page 8
Image 8
Whirlpool YMH6140XF installation instructions Removing and Replacing the Microwave Oven, To replace