Whirlpool YMH7140XF To remove, Installation Instructions, Excessive Weight Hazard, wWARNING

INSTALLATION INSTRUCTIONS

REMOVING AND REPLACING THE MICROWAVE OVEN

wWARNING

Excessive Weight Hazard

Use two or more people to move and install microwave oven.

Failure to do so can result in back or other injury.

If you need to remove your Microwave Hood Combi- nation for any reason, follow these simple steps:

4. While wearing gloves, grasp the microwave oven

supports and firmly

E	pull the microwave oven
	forward and downward to
	release the microwave
	oven cabinet from the
	mounting plate locking
	pins .

To remove:

1.Unplug microwave oven or disconnect power.

2.Remove filters and vent grille.

	• If filters	are
B
	installed, push in at the

Ctab and slide filter to the

outside edge to remove.

• Remove the two screws from the top of the microwave oven cabinet (the screws located closest to the

Afront corners). Do not

remove the screws

located towards the center of the cabinet.

•Remove the vent grille . Set the screws and grille aside.

3.After removing all oven contents, including the turntable and support, tape the door in the closed position. Then remove the two bolts

D	securing the
	microwave oven to the
	upper cabinet.

F

5.Grasp the microwave oven cabinet. Rotate the

microwave oven down-

Gward. (Be careful that door does not swing

open.) Lift off the support

tabs at the bottom of the mounting plate. Set the microwave oven aside on a protected surface.

continued on next page

7