The Display will show what you touched. This example shows you touched Number Pad 5 for 50% of full power.
5.Touch a Number Pad for the Cook Power you want.
- | The AUTO SETand PROBE TEMP Indica- | ||||||
tor | Lights | will stay | on. The | Display | will | ||
m | show “COOL” if the | food | is less than | ||||
| 90°F.As the food cooks, the Display |
| |||||
6. Touch START. | will | show | the internal | temperature | of | ||
| the | food | for every | 5°F increase. |
| ||
When the probe senses the tempera- ture you selected, the oven shuts off. “End” will show on the Display and 4 beeps will sound. (You can stop the beeping by opening the door or by touching CANCEL.) “End” will remain on the Display and a reminder tone will sound every 60 seconds (to remind you that food is left in the oven) until the door is opened or CANCEL is touched. The Display will then show the time of day.
NOTE: You can set Auto Set TEMP to follow COOK.
Auto Set TEMP can be programmed with the Temperature Probe out, but the oven will pause between the last Cook cycle and “PROB”will show on the Display to remind you to plug in the Temperature Probe.
Changing the Pre-programmed Setting
You can change the
1.Touch Auto Set TEMP twice.7 will be displayed.
2.Touch the Number Pads for the new desired temperature between 90°F and 200°F. If HIGH Cook Power is desired, skip to Step 5.
3.Touch COOK POWER.
4.Touch the Number Pad for the desired Cook Power.
5.Touch START.The oven will start. If food is not to be cooked at this time, touch CANCEL. The new temperature and Cook Power will be stored in memory for future use. NOTE: If electric power ever goes off, the oven will go back to the
165°F at HIGH Cook Power setting.
14
