m . . . | . . | .:m | 12. | When Cook 2 ends, “End” will show | on | |
|
|
|
| the Display and 4 beeps will sound. | ||
|
|
|
| (You can stop the beeping | by opening | |
|
|
|
| the door or by touching CANCEL.) |
| |
|
|
|
| “End” will remain on the Display and a | ||
|
|
| I reminder tone will sound every 60 sec- | |||
|
|
|
| onds [to remind you that food is left in | ||
|
|
| ’ | the oven) until the door is opened | or | |
Hints for cooking with more than one cycle
You can program the cooking cycles in any order. However, when the microwave oven is
started, it will automatically go through the cycles in the order of the examples described in this book. For example, if you program COOK 1, KEEPWARM and QUICK DEFROST,the microwave
oven will automatically follow this sequence: QUICK DEFROST + (STANDING TIME] + COOK 1 + KEEP WARM.
NOTE: The microwave oven will automatically provide standing time between QUICK DEFROST and COOK 1.(See page 16.)
If you want the oven to stop between cycles so that you can check food, add ingredients or additional food items, stir, turn over, etc., you can program PAUSE between each Cook cycle. (See page 22.)
Changing or adding instructions
You can change times, Cook Powers, or add cycles any time before touching STARTor during oven operation.
l
l
l
l
l
l
Touch the Cook cycle you wish to change or add (COOK 1 or 2). Touch Number Pads for new time, if desired.
Touch COOK POWER, if change is desired.
Touch Number Pad for new Cook Power, or touch COOK POWER again if a HIGH Cook Power is desired.
Touch in new cycle and time, if desired. Touch START.
Cooking with the Temperature Probe
The Temperature Probe helps take guesswork out of cooking roasts and larger cas- seroles. The probe is designed to turn off the oven when it senses the temperature you chose. See your MICRO MENUS” Cookbook for helpful information in cooking different types of food.
DO THIS...
|
|
|
|
| Socket |
!\ | Cable | 3 | 1’1 i |
| . ? I |
|
|
| |||
| Probe |
| \ | Plug |
1.Insert at least YJof the Temperature Probe into the food. [See page 21.)
2.Place food in the oven and plug the probe into the socket on the oven wall.
3.Make sure the probe does not touch any part of the oven interior. Close the door.
continued on next page
