The Cook-top light:

Electrical Shock Hazard

Turn off power at main power supply before re- placing the light bulb. Failure to do so could re- sult in electrical shock.

2.Remove the bulb cover mounting screws.

3.We recommend replacing bulb(s) with candetabra- base 30-watt bulb(s) avail- able from your authorized WhirlpoolSM service com- pany (Part No. 4158432).

The Oven Light:

.

Electrical Shock Hazard

Turn off power at main Ipower supply before re- placing the light bulb.

Failure to do so could re- suit in electrical shock.

2.Remove the vent cover mounting screws.

3.Tip the cover forward, then lift out to remove.

4.Remove bulb holder mounting screw.

a,

II

6. We recommend replacing bulb with candelabra-base

30-watt bulb available from your authorized Whirlpools” service company (Part No. 4158432).

 

7. Replace

the bulb holder

5. Lift up the bulb holder.

and mounting

screw.

8.Slide the top of the vent cover into place. Push the bottom until it snaps into place. Replace the mount- ing screws. Turn the power back on at main power SUPPlY.

29

Page 29
Image 29
Whirlpool MH7lOOXY manual Cook-top light, Oven Light