Installation instructions
BEK)RE YOU BEGIN, READ THE FOLLOWING INSTRUCTIONS COMPLETELY AND CAREFULLY.
Installing your microwave oven
1.Empty the mrcrowave oven and clean Inside
It wrth a soft damp cloth Check for dama 6 e such as misaligned door. damage around the door or dents Inside the oven or on the exterior If there IS any damage, please do not operate the unit until it has been checked by on authorized Whirlpool service technrcran and any repairs made
2.Put the oven on a cart, counter, table or shelf that is strong enough to hold the oven and the food and utensils you put in it. [The control side of the unit is the heavy side. Use care when handling.] The weight of the oven is approximately
39Ibs. (17.7 kg.).
TOP
1 inch
+
3.Do not block the vent or air intake open- ings on the rear of the oven. Blocking vent or air intake openings con cause damage to the oven and poor cooking results Make sure the microwave oven legs ore in place to ensure proper air flow
4.Do not install the microwave oven so that both sides and the top are flush with walls, shelves or cabinets. Leave ctear- once of at least 2 in. (5.08 cm) on the left side and 1 In (2.54 cm] on the top and rrghl side for proper operation
Do not install the oven next to or over a
conventional surface unit or in any area where excessive heat and steam are generated. This could damage
the microwave oven.
