Olympus MAUSB-100 manual Windows Me/2000/XP, Install the utility software, How to install

Windows Me/2000/XP

How to install

You do not need to install the utility software to use the MAUSB-100.

Also refer to your computer’s user manual and the manuals for any optional devices you are using.

1 Turn on the computer <Me/2000/XP
Install>

Turn on your computer’s power (and connected devices) to start Windows Me/2000/XP.

If you are using a Windows 2000/XP, log on with the user name [Administrator], or use a user name with administrator privileges.

2 Install the utility software <Me/2000/XP
Install>

Before using the MAUSB-100 for the first time, it is recommended to install the utility software included on the provided CD-ROM.

●The device driver will not be installed with this procedure; it is not necessary for Windows Me/2000/XP since it is recognized as an OS-standard device driver.

Before installation, make sure that the computer is turned on, then follow the steps below to install the utility software on your computer.

●Note that the windows shown below may look different on your computer, depending on how your operating system is configured.

1.Turn on the computer, then place the provided CD-ROM into the computer’s CD-ROM drive.

2.When the CD-ROM is recognized, the InstallShield setup window is displayed for a few seconds. Then, the [InstallShield Wizard] window appears.

3.Click the [Next] button.

●If the window at right does not appear, refer to

“If the installation window does not appear when the CD-ROM is loaded” ( p. 20).

●If you want to cancel the installation, click [Cancel].

18