3 | Connecting to the computer | <Mac OS 9Operation> |
Connect the
Notes
●Make sure the connector is fully inserted.
●When inserting the connector, make sure it is oriented correctly (refer to the pictures below). Inserting the connector incorrectly may damage the connector and/or the computer’s USB port.
●Make sure there is adequate space around the computer to connect the
●If there is not enough space for the
●Do not apply force to the computer's USB port or the
In the example, the
Status lamps |
|
|
Green status lamp lights | : When the | |
Red status lamp lights* | : When reading/writing to a card. |
*The status lamps may look in orange as both the green and red status lamps light together.
●Do not release the hold switch, remove the card or disconnect the
●The green and red status lamps blink slowly if the card is not recognized correctly. When this happens, follow the instructions in “4 Removing a card” ( p. 33) to remove the card from the
When the card is recognized correctly
When the card is inserted correctly and the
●The title of the card varies depending on the card inserted.
32