Olympus MAUSB-100 manual 98/98 SEInstall, When the Add New Hardware Wizard window appears

<98/98 SEInstall>

If the installation window does not appear when the CD-ROM is loaded

Follow the steps below to specify the file and start installing.

1.Double-click[My Computer].

2.Right-click[OLYMPUS]. Select [Open] from the pop-up menu.

3. Double-click [MAUSB_100].

4.Double-click [Setup.exe].

●The [InstallShield Wizard] window appears. Start installing by following “2 Install the device driver/ utility software” ( p. 7).

When the [Add New Hardware Wizard] window appears

If you connect the MAUSB-100 to the computer before installing the device driver and utility software, the [Add New Hardware Wizard] window appears. In this case, follow the steps below.

1.Disconnect the MAUSB-100 from the computer ( p. 13).

2.Click the [Cancel] button.

3.Place the CD-ROM into the CD-ROM drive.

Follow the instructions in “2 Install the device driver/utility software” ( p. 7).

9