Operating the
The operating procedure for the
1 | Inserting a card | <Mac OS 9Operation> |
1.Make sure that the hold switch is released, then insert a card into the
Make sure the card is level and that the
2.Lock the hold switch.
Status lamps
Inserting the card
Hold switch
Card slot
MB 128
MB 128
Notes
•Make sure that the card is facing the right way.
•Do NOT insert the card at an angle. Forcing a card in diagonally may damage the card and/or the
•Be sure to lock the hold switch after inserting the card. The computer will not be able to recognize the card if the hold switch is released.
2 Setting the write-protect switch <Mac OS 9Operation>
Before connecting the
ON : When you want to protect data stored on the inserted card from being deleted by mistake. The stored data cannot be changed, moved or deleted from the card, and the card cannot be written to or formatted.
OFF : When you want to change, move or delete the data stored on the inserted card, or want to write to or format the card.
OFF
ON
Note
If you have important data stored on the card, set the
31