Olympus MAUSB-100 manual When formatting is complete, Format completed. appears

3.Click [Check xD]. [The card is ready.] appears if the xD-Picture Card is recognized by the computer.

●If an xD-Picture card is not already inserted in the MAUSB-100, a warning message saying [Insert xD- Picture card.] appears.

4.Click [Format xD]. A warning message saying [Formatting will erase all data on this card! To format, click OK. To quit, click Cancel.] appears. To format the card, click [OK].

●The red status lamp lights while the card is being formatted. NEVER remove the card or disconnect the MAUSB-100 from the computer when the red status lamp is lit.

5.When formatting is complete, [Format completed.] appears.

●If the MAUSB-100's write-protect switch is set to ON, the card cannot be formatted and a warning message saying [This card is protected.] appears.

6.Click [Exit] to close [xDFormat].

●If you want to use the card after formatting, be sure to close the utility software [xDFormat] first.

●Be sure to close the utility software [xDFormat] before removing the card or disconnecting the MAUSB-100 from the computer.

41