22
*Always refer to Service Sheet and Use and Care Manual for information specic to the refrigerator you are servicing.
KitchenAid Stealth Control Overview and
Programming Instructions (continued)
Adjusting Temperature Set Points:
Pressing and holding TEMPERATURE starts a 3,2,1 second countdown. During the countdown
using the dispenser cancels the countdown and no dispensing is permitted. The number ‘3’ blinks
3 times and an ‘invalid’ tone sounds 3 times,. The user has to release both the pad and the button
and press the button again to start the countdown over. During the countdown, pressing any other
button or releasing the pad cancels the countdown and the ‘3’ blinks 3 times and the ‘invalid’ tone
sounds 3 times. The user has to start over.
Please note: the blinking and toning is synchronized so that the moment the number ‘3’ blinks, the
tone is sounded. After 3 seconds, the TEMPERATURE shows up with the CURRENT refrigerator
setting. See figure 7.
Pressing TEMPERATURE changes between the refrigerator and freezer compartments and
displays the current setting.
Pressing the ICE MODE pad or after 60 seconds of no activity, the display will revert back to the
normal screen.
ICE MODE LIGHT MAX ICE LOCK
Hold 3 Sec.
TEMPERATURE
Hold 3 Sec.
RESET FILTER
Hold 3 Sec.
Back Units Select Zone -+
Refrigerator
Recommended Setting
Figure 7
Adjusting Temperature Set Points:
Pressing and holding TEMPERATURE starts a 3 second countdown on the display.
During the countdown using the dispenser cancels the countdown and no dispensing
is permitted. The number ‘3’ blinks 3 times and an ‘invalid’ tone sounds 3 times. The
user has to release both the pad and the button and then press the button again to
start the countdown over.
During the countdown, pressing any other button or releasing the pad cancels the
countdown and the ‘3’ blinks 3 times and the ‘invalid’ tone sounds 3 times. The user
has to start over.
Note: The blinking and toning is synchronized so that the moment the number ‘3’
blinks, the tone is sounded. After 3 seconds, the TEMPERATURE shows up with the
CURRENT refrigerator setting. See Figure 7.
Pressing TEMPERATURE changes between the refrigerator and freezer compart-
ments and displays the current setting. Pressing the ICE MODE pad or after 60
seconds of no activity, the display will revert back to the normal screen.