Uslng PAUSE wlth QUICK DEFROST
If the defrosting instructions call for stirring or turning over the food in the middle of the defrost cycle, program PAUSE after QUICK DEFROST. See pages
Standlng time after defrosting
For best results, allow the food to stand for a while after defrosting. This helps equalize the tempera- ture of the food to provide more even defrosting.
When COOK 1 follows QUICK DEFROST, the oven automatically provides a standing time equal to the time touched in for QUICK DEFROST.
COOK 1 will begin after the automatic standing time. See “Cooking automatically after defrosting, ‘I page 18.
For a different standlng time:
1.Touch QUICK DEFROST and the desired time.
2.Touch COOK 2.
3.Touch Number Pads for the desired standing time.
4.Touch COOK POWER.
5.Touch “0”for zero Cook Power.
6.Touch START.
When QUICK DEFROST is over, the oven will shut off. Two beeps will sound. The Display will count down the new standing time programmed.
About the Quick Defrost cycle
The microwave oven automatically divides the time set for the Quick Defrost cycle into three equal parts:
First part ............80% of full Cock Power Second part ......50% of full Cook Power Third part ...........20% of full Cock Power
This automatic stepdown in Cock Power helps defrost food quickly and completely.
Changlng or addlng defrost time
You can change the defrosting time any time before or after touching START.
1.Touch QUICK DEFROST.
2.Touch Number Pads for new time.
3.Touch START.
Any new time setting made while Quick Defrost Is operating will continue the defrosting at only 20% of full power.
The best time to change the setting is near the end of the Quick Defrost cycle.
Open the door.
Check the food with a
Close the door and touch START to continue the cycle if no additional time is needed. OR...
Touch in new instructions for additional defrost- ing time.
