Using PAUSEwith QUICK DEFROST
If the defrosting instructions call for stirring or turning of the food in the middle of defrost cycle, program PAUSE after QUICK DEFROST. Half way through the defrost cycle a beep will sound, “PAUS”will show on the Display and the oven will stop defrostlng. After stirring or turning the food, touch STARTto continue the defrost cycle.
Standing time or cooking automaticaly after defrosting
For best results, allow the food to stand for a while after defrosting. This helps equalize the temperature of the food to provide more even defrosting.
When | COOK | 1 follows | QUICK DEFROST,the oven | automatically | provides | a standing time | ||
equal | to the time touched in for QUICK | DEFROST.COOK 1 will | begin after the | automatic | ||||
standing time. | There | is no standing time | between | QUICK DEFROST and | COOK | 2 or QUICK | ||
DEFROST and | KEEPWARM. |
|
|
|
|
| ||
For cooklng automatlcally after defrosttng:
1.Touch QUICK DEFROST and desired time.
2.Touch COOK 1.
3.Touch numbers for desired cooking time.
4.Touch COOK POWER. (If you want to cook at high power, skip to step 6.)
5.Touch a number for desired Cook Power.
6.Touch START.
For a different standlng time:
I. Touch QUICK DEFROST and desired time.
2.Touch COOK 2.
3.Touch numbers for desired standing time.
4.Touch COOK POWER.
5.Touch “0”for zero Cook Power.
6.Touch START
When QUICK DEFROST is over, the oven will shut off. If Cook 1 has not been programmed, 2 beeps will sound and the Display will count down the time for Cook 2 at zero Cook Power. If
Cook 1 has been programmed, the Display will count down and sound 2 beeps before Cook 1 will start. “End” will show on the Display and 4 beeps will sound when the standing time and cooking time is over.
About the “QUICK DEFROST” Cycle
The | microwave | oven automatically | divides the time set for the QUICK DEFROST Cycle | into | ||
three | equal | parts: |
|
|
|
|
First part. |
| 80% | of full | Cook | Power | |
Second part |
| 50% | of full | Cook | Power | |
Third | part |
| 20% | of full Cook | Power | |
This automatic
Changing or adding defrost time
You can change the defrosting time any time before or after touching START.
. Touch QUICK DEFROST
l Touch numbers for new time.
. Touch START.
Any new time setting made while QUICK DEFROST is operating will continue the defrosting at only 20% of full power.
The best time to change the setting is near the end of the QUICK DEFROST Cycle.
l Open the door.
l Check the food with
l Close the door and touch STARTTo continue the cycle if no additional time is needed OR...
l Touch in new instructions for additional defrosting time.
12
