Whirlpool MW36OOXS manual Do This, This Happens

DO THIS... THIS HAPPENS...

.‘.I

m .

4. Touch PROBE TEMP.

5.Touch Number Pads for the desired flnal temperatures between 90°F and 200°F.

ali-. . .-

6.Touch COOK POWER. (Option: Touch START if you want to use high power.)

m0

7.Touch the Number Pad for the Cook Power you want.

8. Touch START.

The PROBE TEMP Indicator Light will come on and the Display will show ‘I?

The Display will show the numbers you touched in the order you touched them. This example shows a final cooked temperature of about 140°F.

The COOK POWER Indicator Light will come on and the Display will show “P-HI:’This shows the oven is

preprogrammed to cook at full [HIGH] power.

The Display will show what you touched. This example shows you touched Number Pad 6 for 60% of full power.

The PROBE TEMP and COOK POWER Indicator Lights will stay on. The Dis- play will show “CCCL” to show the food is less than 90°F.As the food cooks the Display will show the in- ternal temperature of the food for every 5°F increase.

For 2 of every 10 seconds, the Dis- play will show the Cook Power you selected, if you are using a Cook Power other than high.

When the probe senses the tem- perature you selected, the oven shuts off. “End” will show on the Display and 4 beeps will sound. (You can stop the beeping by opening the door or by touching CANCEL.) “End” will remain on the Display and a beep will sound every 30 seconds (to re- mind you that food is left in the oven] until door is opened or CANCEL is touched. The Display will then show the time of day.

NOTE: “ERR” will be displayed after START is touched, if an incorrect temperature has been selected (under 90°F and over 200°F).

16