Setup

3 Insert/remove the SD card into/ from the card slot.

A

When inserting an SD card, face the label side A upwards and press it straight in as far as it goes.

When removing the SD card, press the center of the SD card and then pull it straight out.

4 Securely close the card slot cover.

Concerning the SD card

Electrical noise, static electricity or failure of this unit or the SD card may damage or erase the data stored on the SD card. We recommend saving important data on a computer.

Card access lamp

When this unit accesses the SD card (reading, recording, playback, erasing, etc.), the access lamp lights up.

If the following operations are performed when the access lamp is lit, then the SD card or the recorded data may be damaged or this unit may malfunction.

sRemoving the SD card

sOperating the OFF/ON switch or the mode dial

sRemoving the battery or disconnecting the AC adaptor

Selecting a mode

The mode dial is used to switch between recording and playback modes.

Rotate the mode dial slowly but surely.

Rotate the mode dial, and set the desired mode pictograph to the position shown in the illustration.

Video recording mode (l 42)

Use this to record motion pictures on a disc.

Video playback mode (l 59)

Use this to play back motion pictures on a disc.

Picture recording mode (l 45) Use this to record still pictures on an SD card.

Picture playback mode (l 62)

Use this to play back still pictures on an SD card.

Do not forcefully rotate the dial.

How to use the joystick

This unit has a joystick for selecting functions, performing operations, etc. so it is easy to operate this unit with one hand.

Basic operations

Operations on the menu screen and selection of files on the thumbnail view screen, etc.

32

LSQT1146

Page 32
Image 32
Panasonic VDR-D220 Selecting a mode, How to use the joystick, Insert/remove the SD card into/ from the card slot