Panasonic VDR-D220 Select the layout setting on page Layout, No frame print, Frame print

With other products

[A4]: A4 size

≥You cannot set paper sizes not supported on the printer.

8 Select the layout setting on [PAGE LAYOUT].

[STANDARD]: Layout specific to the printer

[	]:		No frame print
[			Frame print
		]:

≥You cannot set page layouts not supported on the printer.

9 Select [PRINT] # [YES] and press the joystick.

The pictures are printed.

≥Exit PictBridge by disconnecting the USB cable after the pictures have been printed.

When you want to stop printing halfway

Move the joystick down.

A confirmation message appears. If [YES] is selected, the number of prints set is canceled and the screen returns to step 3. If [NO] is selected, all the settings are kept and the screen returns to step 3.

≥Avoid the following operations during printing. These operations disable proper printing. jDisconnecting the USB cable jRemoving the SD card

jSwitching the mode dial jTurning off the power

≥Check the settings for the paper size, quality of print, etc. on the printer.

≥The sides of pictures recorded when [ 0.2 ] is set may be cut at printing. Check before printing.

When using a printer with a trimming or borderless printing function, cancel this function before printing. (Refer to the operating instructions of the printer for details.)

≥You may not be able to print still pictures recorded with other products.

≥When the unit is connected directly to the printer, the DPOF settings cannot be used.

≥Connect the printer directly to this unit. Do not use a USB hub.

82

LSQT1146