Panasonic VDR-D220 Push the Reset, Disc After Pushing the Reset Switch to Repair

Others

Problem

Check points

	≥ Is this unit connected to a computer?
The indication	# No operation can be performed on this unit when it is connected
	to a computer.
disappears.
	≥ Turn off the power to this unit. If the power cannot be turned
The screen is frozen.	off, press the RESET button, or remove the battery or AC
No operation can be	adaptor and then reattach it. After that, turn on the power
	again. If normal operation is still not restored, detach the
performed.
	power connected, and consult the dealer who you purchased
	this unit from.

≥Is the disc scratched or dirty?

#After using the following method to restart the unit, eject the disc and clean it. (l 24) If there are scratches on the disc, use a new disc.

≥The unit has automatically detected an error. Press the RESET button with the projecting part of the lens cap A. This will restart the unit.

“PUSH THE RESET	A
SWITCH.” or “CHECK
THE DISC AFTER
PUSHING THE RESET
SWITCH TO REPAIR THE
DATA.” is displayed.

≥If you do not press the RESET button, the power to this unit is turned off automatically about 1 minute later.

≥Even after you press the RESET button, the indication may still appear repeatedly. If so, this unit needs repair. Detach the power connected, and consult the dealer who you purchased this unit from. Do not attempt to repair the appliance by yourself.

If the SD card is inserted	≥ Check that the device is compatible with the capacity or type of
in another device, it is not	SD card (SD Memory Card/SDHC Memory Card) that you
	inserted.
recognized.
	# Refer to the operating instructions of the device for details.
With a computer

Problem

Check points

Even if connected by the USB cable, this unit is not recognized by the computer.

≥The USB function selection screen does not appear if the USB cable is connected while the menu screen is displayed.

#Close the menu screen before connecting the USB cable.

≥Is the AC adaptor connected?

#Use the AC adaptor when connecting the unit and a computer.

≥Select another USB terminal on the computer.

≥Check the operating environment. (l 83)

≥Turn the unit off then on and disconnect then reconnect the USB cable.

103

LSQT1146