Sony ST-S3000ES Selecting the German Display, Mains lead hookup, To return to the English display

Getting Started

Mains lead hookup

Connect the mains lead to a wall outlet after completing all of the previous connections.

		ANTENNA
A	FM	B	AM	LINE OUT
				R	L
75	COAXIAL		y

/

to a wall outlet

Selecting the German Display

You can choose either an English or a German language display. The factory preset language is English. To change the display to German, follow the steps below.

POWER

MENU

1Press POWER to turn off the tuner.

2While holding down the MENU button, press POWER to turn on the tuner .

“Deutsch” appears in the display.

To return to the English display

Repeat this procedure. “English” appears in the display.

6GB

Storing FM Stations Automatically (Auto-betical select)

With “Auto-betical select” you can automatically store up to 30 FM and FM RDS stations in alphabetical order without redundancy. Additionally, “Auto-betical select” only stores the stations with the clearest signals. If you want to store FM or AM (MW and LW) stations one by one, see “Receiving broadcasts by scanning stations (Automatic tuning)” on page 9 and “Presetting Radio Stations” on page 11.

POWER ENTER TUNING/SELECT

MENU

1Connect FM aerial.

See “FM aerial hookups” on page 5.

2Press POWER to turn on the tuner.

3Press MENU repeatedly until “Auto-betical” appears in the display.

4Press ENTER.

“Yes” and “No” appear in the display.

5Press TUNING/SELECT + or – to flash “Yes” in the display.

6Press ENTER.

The tuner scans and stores all the FM and FM RDS stations in the broadcast area.

For RDS stations, the tuner first checks for stations broadcasting the same programme, then stores only the one with the clearest signal. The selected RDS stations are sorted alphabetically by their Programme Service name, then assigned a two-character preset code. For more details on RDS, see page14.

Regular FM stations are assigned two-character preset codes and stored after the RDS stations.

To change the location of, or erase, a preset station

See “Organizing the Preset Stations” on page 12.

Notes

•If you move to another area, repeat this procedure to store stations in your new area.

•For details on tuning stored stations, see page 11.

•The ANTENNA, ANT ATT, IF BAND , and FM MODE settings are also stored along with the station.

•If you move the aerial after storing stations using "Auto- betical select," the stored settings may no longer be valid. If this happens, store the stations again.