Panasonic VDR-D220 operating instructions Messages

Others

Messages

CANNOT READ THIS DISC.
PLEASE CHECK FOR	The disc is scratched or dirty. Eject the disc and clean it. (l 24) If
SCRATCHES OR STAINS	there are scratches on the disc, use a new disc.
ON DISC.
NO DATA.	There are no images recorded on the disc or card.
THIS DISC IS	You inserted an incompatible disc (copy-protected discs, etc.).
INCOMPATIBLE.
PLEASE CHECK THE	You inserted a disc that cannot be read on this unit (a disc recorded
DISC.	in an incompatible data format etc.).
	You inserted a disc that does not meet the DVD standard for quality
RECOMMENDED TO USE	and performance so you may not be able to record normally. Refer
	to the following support site for information about discs that have
PANASONIC DISC	been confirmed as compatible by Panasonic.
	http://panasonic.co.jp/pavc/global/cs/e_cam
	(This website is in English only.)
CANNOT RECORD.	A finalized DVD-RW (Video format) or DVD-R has been inserted.
	After finalizing, the discs become play-only and cannot record. If you
(THIS DISC IS FINALIZED)	un-finalize a DVD-RW (Video format), it can be used for recording.
	(l 75)
CANNOT RECORD. DISC
IS FULL.	The disc is full or the number of scenes has reached the maximum
CANNOT RECORD. THE
	limit so no further data can be recorded. Delete unnecessary scenes
NUMBER OF SCENES HAS	(l 64) or insert a new disc.
EXCEEDED THE MAXIMUM
LIMIT.
CANNOT OPERATE.
TEMPERATURE IS HIGH.	The temperature of the unit is high so it cannot be operated. Turn off
PLEASE TURN OFF AND	the power, wait until the unit cools and then turn on the power again.
WAIT A WHILE.
FINALIZE THE DISC TO	If you insert a DVD-RW or a DVD-R disc recorded in this unit (that
	has not been finalized) into another device such as DVD recorder,
ENABLE PLAYBACK ON
	computer, etc., the disc may become unusable. Be sure to finalize
OTHER DEVICES.
	the disc on this unit before inserting it in other devices.
CANNOT UN-FINALIZE	DVD-R cannot be un-finalized.
THIS DISC.
CHECK CARD.	This card is not compatible or it cannot be recognized by the unit.
CARD LOCKED.	The write protection switch on the SD card is set to LOCK. (l 23)

96

LSQT1146