Panasonic VDR-D220 operating instructions Installing DVD-RAM Driver

With a computer

≥Before starting the installation, close any other software applications which are running.

≥Do not perform any other operations on your computer while the software is being installed.

≥If another DVD-RAM Driver is already installed in your computer, check this DVD-RAM Driver. If packet writing software which supports DVD- RAM discs is installed, it is necessary to uninstall it and then install the provided DVD-RAM Driver.

Installing DVD-RAM Driver

1 Insert the CD-ROM into the computer.

The [Setup Menu] screen will appear.

≥If the [Setup Menu] screen does not appear, double-click the CD-ROM drive icon in [My Computer].

2 Click [DVD-RAM Driver].

≥The software application may not run properly if you cancel the installation at any point (e.g. by pressing [Cancel]).

3 Click

[Driver and Formatter Setup].

≥If an [Information] or [Question] message appears, continue following the on-screen messages for installation.

4 Click [Next].

5 Read carefully through the End User License Agreement (l84), then click [Yes].

≥You cannot install the application if you click [No].

6 Click [Next].

Continue to follow the on-screen messages to install it.

7 When installation is complete, some notes will appear:

Check the contents, then click [k] at the top right of window.

85

LSQT1146