Panasonic VDR-D220 operating instructions Setting date and time, Dated/T, Off

Models: VDR-D220

1 124
Download 124 pages 34.59 Kb
Page 38
Image 38

Setup

Setting date and time

When the unit is turned on for the first time, a message asking you to set the date and time will appear.

Select [YES] and press the joystick. Perform steps 2 and 3 below to set the date and time.

If the screen shows the incorrect date and time, then adjust it.

¬Rotate the mode dial to select or

.

1 Press the MENU button, then select [BASIC] # [CLOCK SET]

#[YES] and press the joystick.

MENU

2 Move the joystick left or right to select the item to be set. Then, move the joystick up or down to set the desired value.

The year will change as follows: 2000, 2001, ..., 2099, 2000, ...

The 12-hour system is used to display the time.

3 Press the joystick to enter the selection.

The clock function starts at [00] seconds when the joystick is pressed.

After pressing the MENU button to finish the setting, check the date and time display.

Changing the date and time display style

Press the MENU button, then select [SETUP]

# [DATE/TIME] # desired display style and press the joystick.

[DATE][D/T]

DEC.15.2007

DEC.15.2007 3:30 PM

 

 

 

[OFF]

Changing the display style

Press the MENU button, then select [SETUP]

#[DATE FORMAT] # desired display style and press the joystick.

Display style

Screen display

[Y/M/D]

2007.DEC.15

 

 

[M/D/Y]

DEC.15.2007

 

 

[D/M/Y]

15.DEC.2007

 

 

 

 

The date and time function are driven by a built-in lithium battery.

Make sure to check the time before recording.

If the time display becomes [- -], the built-in lithium battery has run down. Use the following steps to charge the battery. When you turn on the power for the first time after charging, a message asking you to set the date and time will appear. Select [YES] and set the date and time.

To recharge the built-in lithium battery Connect the AC adaptor or attach the battery to the unit, and the built-in lithium battery will be recharged. Leave the unit as it is for approx. 24 hours and the battery will save the date and time for approx. 6 months. (Even if the OFF/ ON switch is set to OFF, the battery is still being recharged.)

38

LSQT1146

Page 38
Image 38
Panasonic VDR-D220 operating instructions Setting date and time, Dated/T, Off