Panasonic VDR-D220 Manual shutter speed/ aperture adjustment, To restore to automatic adjustment

Recording

∫About the white balance sensor A

A

The white balance sensor detects the type of light source during recording.

Do not cover the white balance sensor during recording, or it may not function properly.

≥When the unit is turned on with the lens cap attached, the automatic white balance adjustment may not function properly. Please turn the unit on after removing the lens cap.

≥When the [ ] display flashes, the manual white balance previously adjusted is stored. Whenever recording conditions change, re-set the white balance for correct adjustment.

≥When setting both the white balance and the iris/gain, set the white balance first.

Manual shutter speed/ aperture adjustment

(RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD)

Shutter Speed:

Adjust it when recording fast-moving subjects.

Aperture:

Adjust it when the screen is too bright or too dark.

¬Rotate the mode dial to select or

.

1 Set the AUTO/MANUAL/FOCUS switch to MANUAL.

MNL

3/3NEXT

The icon shown in the illustration is displayed automatically.

2 Move the joystick left or right to select [ ] (aperture) or [ ] (shutter speed).

MNL

3/3NEXT

3 Move the joystick left or right to make the adjustment.

A	MNL
	1/100
B	OPEN

BACK

AShutter speed: 1/60 to 1/8000 1/60 to 1/500

≥The shutter speed closer to 1/8000 is faster.

BIris/Gain value:

CLOSE # (F16 to F2.0) # OPEN # (0dB to 18dB)

≥Value closer to [CLOSE] darken the image.

≥Value closer to [18dB] brighten the image.

≥When the iris value is adjusted to brighter than [OPEN], it changes to the gain value.

To restore to automatic adjustment

Set the AUTO/MANUAL/FOCUS switch to AUTO.

≥When setting both the shutter speed and the iris/gain value, set the shutter speed and then set the iris/gain value.

∫Manual shutter speed adjustment

≥ Avoid recording under fluorescent light, mercury light or sodium light because the color and brightness of the playback image may change.

57

LSQT1146