17
LSQT1146
Before using
Adjust the belt length so it fits your hand.
Adjust the belt length and the pad
position.
1Flip the belt.
2Adjust the length.
3Replace the belt.
Attach the lens cap to protect the surface of the
lens.
1Pass the end of the lens cap cord
through the belt.
2Pass the lens cap through the
loop.
3To attach or remove the lens cap,
hold both sides of the lens cap
with the tips of your finger and
thumb.
During recording
The removed lens cap can be attached to the
lens cap fixture.
Rotate the lens hood counter-
clockwise A to remove it.
In order to attach it, rotate it
clockwise B.
Using grip belt
Attaching the lens cap
31
2
Lens hood
A
B
LSQT1146.book 17 ページ 2006年12月5日 火曜日 午前10時40分