Panasonic VDR-D220 Software application uninstallation, Click Finish, DVD-RAM Driver

With a computer

8 Click [Finish].

Windows 2000 only:

The detection of device will start, after which it will take several minutes for the computer to detect the device. When detecting the device is complete, a message that prompts you to reboot will appear:

Click [Yes].

The computer must be rebooted for the driver to work.

∫If any trouble has occurred while installing DVD-RAM Driver:

When [Block] is selected in the [Driver Signing Options] in the [System Properties], the installation procedure will not complete. Select [Warn] and try again.

To check and change the setting, select [start] # ([Settings] #) [Control Panel] # ([Performance and Maintenance] #) [System] and select [Driver Signing] of the [Hardware] tab.

∫About the [RAMASST] support tool: [RAMASST] is a support tool for Windows XP that disables the drive’s CD writing function so that data can be written from a computer to a DVD-RAM.

When you install the DVD-RAM Driver, [RAMASST] is automatically installed and displayed in [Startup].

Reading the operating instructions of the software applications

For details on how to use the software applications, read the PDF instructions.

≥You will need Adobe Acrobat Reader 5.0 or later to read the PDF operating instructions. (l 83)

∫DVD-RAM Driver

Select [start] # [All Programs (Programs)] # [DVD-RAM] # [DVD-RAM Driver] # [Using DVD-RAM disc].

Software application uninstallation

Follow the steps below to uninstall any software applications that you no longer require.

1 Select [start] # ([Settings] #) [Control Panel] # [Add or

Remove Programs (Applications)].

2 Select the software application to be deleted, then click [Change/ Remove] ([Change or Remove] or [Add/Remove]).

≥Proceed with the uninstallation by following the on-screen instructions.

≥After uninstalling the software, be sure to reboot the computer.

86

LSQT1146