System Resources Screen
6E122-26, 6E132-25, 6E123-26 and 6E133-25 User’s Guide 5-73
Flash Memory Installed (Read-only)
Indicates the amount of FLASH memory installed in the 6E12X-26 and
6E13X-25 and how much is currently available.
DRAM Installed (Read-only)
Indicates the amount of DRAM installed in the 6E12X-26 and 6E13X-25
and how much of it is currently available.
NVRAM Installed (Read-only)
Indicates the amount of NVRAM installed in the 6E12X-26 and
6E13X-25 and how much of it is currently available.
Current Switch Utilization (Read-only)
Shows how much (percentage of capacity) the 6E12X-26 and 6E13X-25
is currently being used.
Peak Switch Utilization (Read-only)
Shows the peak percentage of maximum switching capacity, since last
reset.
Reset Peak Switch Utilization (Toggle)
Allows the user to reset the Peak Switch Utilization field. The switch may
be set to either YES or NO as described in Section 5.21.1. YES resets the
Peak Switch Utilization field to the current system traffic.
5.21.1 Setting the Reset Peak Utilization
To set the Reset Peak Utilization field to YES or NO, proceed as follows:
1. Use the arrow keys to highlight the Peak Switch Utilization field.
2. Press the SPACE bar to select YES or NO.
3. Use the arrows keys to highlight the SAVE command at the bottom of
the screen.
4. Press ENTER. The message “SAVED OK” is displayed.