Installing the 6E12X-26 and 6E13X-25 Into the 6C105 Chassis

4.Remove the module from the plastic bag. (Save the bag in the event the module must be reshipped.) Observe all precautions to prevent damage from Electrostatic Discharge (ESD).

5.Examine the module for damage. If any damage exists, DO NOT install the module. Immediately contact the Cabletron Systems Global Call Center.

To prevent damaging the backplane connectors in the following

!step, take care that the module slides in straight and properly

CAUTION

engages the backplane connectors.

 

NOTE

In the following step, ensure that the top plastic locking tab lines up with the desired slot number located on the front panel of the chassis. Refer to Figure 3-1.

6.Locate the slot guides that line up with the number of the slot in which the module will be installed. Install the module in the chassis by aligning the module circuit card between the upper and lower metal rail guides of the desired slot, sliding it into the chassis, and locking down the top and bottom plastic locking tabs, as shown in Figure 3-1. Take care that the module slides in straight and properly engages the backplane connectors.

6E122-26, 6E132-25, 6E123-26 and 6E133-25 User’s Guide

3-3

Page 29
Image 29
Cabletron Systems 6E123-26, 6E133-25, 6E122-26, 6E132-25 manual Installing the 6E12X-26 and 6E13X-25 Into the 6C105 Chassis

6E122-26, 6E123-26, 6E132-25, 6E133-25 specifications

Cabletron Systems, a prominent name in the networking hardware industry, has produced several notable products that have made significant impacts on network performance and reliability. Among these, the Cabletron Systems 6E133-25, 6E132-25, 6E123-26, and 6E122-26 stand out for their advanced features, versatile applications, and robust technologies.

The Cabletron Systems 6E133-25 is a high-performance modular network switch designed for enterprise environments. It boasts a switching capacity that handles high traffic loads efficiently, facilitating data flow without bottlenecks. With features such as VLAN support and multicast filtering, it allows for more efficient use of network resources. Its ability to support various media types, including fiber and copper, enhances flexibility in deployment scenarios.

The 6E132-25 delivers exceptional performance as a network hub, supporting multiple connection protocols. Its design incorporates redundancy features, ensuring continuous operation in mission-critical applications. One of its standout characteristics is its user-friendly management interface, which simplifies configuration and monitoring tasks, enabling IT administrators to maintain optimal network health with ease.

In contrast, the Cabletron Systems 6E123-26 focuses on providing cost-effective solutions without compromising on quality. It is particularly suitable for smaller networks or branch offices, where budget constraints may limit options. This switch offers essential features including auto-negotiation and automatic port configuration, promoting straightforward setup while preserving performance reliability.

Lastly, the 6E122-26 is engineered for versatility, catering to both small and medium-sized businesses. It supports a range of protocols, ensuring compatibility across various systems. Its robust design incorporates security features that protect against unauthorized access and threats, addressing growing concerns around network vulnerabilities.

Collectively, these products from Cabletron Systems exemplify the company's commitment to innovation in the networking space. They integrate cutting-edge technologies such as QoS (Quality of Service), which prioritizes demanding applications, thereby enhancing user experience and productivity. With their diverse features and scalability, the 6E133-25, 6E132-25, 6E123-26, and 6E122-26 remain relevant in an ever-evolving digital landscape, proving Cabletron Systems' legacy in delivering powerful networking solutions that cater to a variety of organizational needs.