Chapter 5: Local Management

IP Address (Modifiable)

This field allows the IP address to be set for the 6C105 chassis. If an IP address is assigned to the 6C105 chassis all the interface modules installed in the chassis can be managed via this IP address, eliminating the need to assign an IP address to each interface module. To set the IP address, refer to Section 5.7.1.

Subnet Mask (Modifiable)

NOTE

When a valid IP address is assigned, the Subnet Mask field automatically enters the default mask that corresponds with class of IP entered in the IP Address field. Some firmware revisions do support changing the chassis subnet mask from the default value. Refer to your Release Notes to ensure that the Subnet Mask is a modifiable field.

Displays the subnet mask for the chassis. A subnet mask “masks out” the network bits of the IP address by setting the bits in the mask to 1 when the network treats the corresponding bits in the IP address as part of the network or subnetwork address, or to 0 if the corresponding bit identifies the host. The 6C105 chassis automatically uses the default subnet mask that corresponds to the IP class that was entered in the IP address field. Section 5.7.2, Setting the Subnet Mask describes how to change the subnet mask from the default value.

Chassis Date (Modifiable)

Contains a value that the chassis recognizes as the current date. When the chassis date is modified and saved all interface modules installed in the chassis are set to this date. To set a new chassis date, refer to

Section 5.7.3.

Chassis Time (Modifiable)

Contains a value that the chassis recognizes as the current time. When the chassis time is modified and saved, all interface modules installed in the chassis are set to this time. To enter a new time, refer to Section 5.7.4.

Screen Refresh Time (Modifiable)

Contains the rate at which the screens are updated. This setting determines how frequently (in seconds) information is updated on the screen. To enter a new update time, refer to Section 5.7.5.

5-16 6E122-26, 6E132-25, 6E123-26 and 6E133-25 User’s Guide

Page 63 Page 65
Page 64
Image 64
Cabletron Systems 6E133-25, 6E123-26, 6E122-26, 6E132-25 manual Section
Page 63 Page 65

6E122-26, 6E123-26, 6E132-25, 6E133-25 specifications

Cabletron Systems, a prominent name in the networking hardware industry, has produced several notable products that have made significant impacts on network performance and reliability. Among these, the Cabletron Systems 6E133-25, 6E132-25, 6E123-26, and 6E122-26 stand out for their advanced features, versatile applications, and robust technologies.

The Cabletron Systems 6E133-25 is a high-performance modular network switch designed for enterprise environments. It boasts a switching capacity that handles high traffic loads efficiently, facilitating data flow without bottlenecks. With features such as VLAN support and multicast filtering, it allows for more efficient use of network resources. Its ability to support various media types, including fiber and copper, enhances flexibility in deployment scenarios.

The 6E132-25 delivers exceptional performance as a network hub, supporting multiple connection protocols. Its design incorporates redundancy features, ensuring continuous operation in mission-critical applications. One of its standout characteristics is its user-friendly management interface, which simplifies configuration and monitoring tasks, enabling IT administrators to maintain optimal network health with ease.

In contrast, the Cabletron Systems 6E123-26 focuses on providing cost-effective solutions without compromising on quality. It is particularly suitable for smaller networks or branch offices, where budget constraints may limit options. This switch offers essential features including auto-negotiation and automatic port configuration, promoting straightforward setup while preserving performance reliability.

Lastly, the 6E122-26 is engineered for versatility, catering to both small and medium-sized businesses. It supports a range of protocols, ensuring compatibility across various systems. Its robust design incorporates security features that protect against unauthorized access and threats, addressing growing concerns around network vulnerabilities.

Collectively, these products from Cabletron Systems exemplify the company's commitment to innovation in the networking space. They integrate cutting-edge technologies such as QoS (Quality of Service), which prioritizes demanding applications, thereby enhancing user experience and productivity. With their diverse features and scalability, the 6E133-25, 6E132-25, 6E123-26, and 6E122-26 remain relevant in an ever-evolving digital landscape, proving Cabletron Systems' legacy in delivering powerful networking solutions that cater to a variety of organizational needs.
Top Page Image Contents