Chapter 5: Local Management
5-110 6E122-26, 6E132-25, 6E123-26 and 6E133-25 User’s Guide
reset:
Syntax: reset
Description: The reset command allows a soft reset of the
device. The user will be queried to confirm the
reset command to insure against unwanted
resets.
Options: Not Applicable
Example:
show:
Syntax: show [PROTOCOL] [TABLE]
Description: The show command displays information
concerning various components of the device.
Protocols currently supported are IP, IPX,
DECnet, and AppleTalk. Components of those
protocols that are currently supported are ARP
caches, route tables, FIB tables, server tables,
and interface tables. The number of valid
entries in the table will be displayed at the end
of the table display.
!
CAUTION
The Network Tools connection to the module will be terminated
upon execution of this command.
-> reset
174245