TABLE
Error Message | From | Meaning |
Disable pending on diskq %s, try | Kernel | A request to disable the disk queue is already in |
again later |
| progress. Verify that the previous request has |
|
| completed successfully. If it has, this request is no |
|
| longer valid. If it has not, wait for it to complete |
|
| unsuccessfully before attempting to disable the disk |
|
| queue. |
disk service, <ctag>, is active on node "<hostname>" Please
disk service, %s, is active on node "%s"; Please
RM | The remote mirror set being operated on is not active |
| on the current node in the cluster. |
PITC | The iiadm command must be issued on the other |
| node of the cluster. The disk group that the user is |
| attempting to operate on is not active on the node |
| where the iiadm command was issued. |
diskq name is longer than <MAX> characters
disk queue <diskq2> does not match <diskq1> skipping set
RM | The device specified for the disk queue volume is too |
| long for remote mirror to accept. |
RM | The user tried to enable a set into a group that has a |
| disk queue, but the user specified a disk queue that |
| does not match the group’s disk queue. |
diskqueue <diskq> is incompatible | RM | The user tried to enable a set into a group that has a |
|
| disk queue, but the user specified a disk queue that |
|
| does not match the group’s disk queue. |
Disk queue %s is already in use
Disk queue %s operation not possible, set is in replicating mode
Disk queue does not exist for set %s:%s ==> %s:%s
disk queue <diskq> is incompatible with existing queue
disk queue <diskq> is not in disk group "<ctag>"
Disk queue operations on synchronous sets not allowed
Kernel | The volume for the disk queue being added to the set |
| or group is already in use as a data volume, bitmap |
| volume, or disk queue. Use a different volume for the |
| disk queue. |
Kernel | The user attempted to perform disk queue |
| maintenance on a set while the set is replicating. |
Kernel | The user attempted to perform disk queue |
| maintenance on a set that does not have a disk queue. |
RM | The user tried to enable a set into a group that has a |
| disk queue, but the user specified a disk queue that |
| does not match the group’s disk queue. |
RM | The user tried to enable a disk queue that does not |
| reside in the same cluster resource group in which the |
| volume and bitmap reside. |
Kernel | An attempt to enable a sync set with a disk queue, or |
| to add a disk queue to a sync set, has been made. Sync |
| sets cannot have disk queues attached to them. |
26 Sun StorEdge Availability Suite 3.2 Software Troubleshooting Guide • December 2003