Sun Microsystems 3.2 manual If the /dev/rdc Link Is Not Created, netstat

where:

■-T tcp specifies the transport that the service uses.

■hostname is the name of the machine where the service is running.

If the service is not running, this message is displayed:

rpcinfo: RPC: Program not registered

If you see this message, it is possible that the /etc/nsswitch.conf services: entry is incorrectly configured. See “Checking the /etc/nsswitch.conf File” on page 8.

■netstat

This messages shows that the service is running:

# netstat -agrep rdc
*.rdc	*.*	0	0 65535	0	LISTEN
*.rdc	*.*	0	0 65535	0	LISTEN
*.rdc	*.*			0	0
65535	0 LISTEN

If the /dev/rdc Link Is Not Created

Note – Although other applications make entries in the files described in this section, you can edit the files to correct these problems. Always make a backup copy of a file before editing it.

The /dev/rdc pseudo-link might not be created for the following reasons:

■The /etc/devlink.tab file is missing an entry for the /dev/rdc pseudo-link. This example shows a valid entry:

#grep rdc /etc/devlink.tab

type=ddi_pseudo;name=rdc \D

Chapter 2 Remote Mirror Software Troubleshooting Tips 9