Sun Microsystems 3.2 manual Error Messages

C H A P T E R 3

Error Messages

Error messages during the installation process are described in the Sun StorEdge Availability Suite 3.2 Software Installation Guide. Solaris error messages related to the Sun StorEdge Availability Suite software are described in ....

TABLE 3-1lists Sun StorEdge Availability Suite 3.2 error messages in alphabetical order. The error messages come from the following sources:

■PITC: From the point-in-time copy software. This software used to be called “Sun StorEdge Instant Image” software.

■RM: From the remote mirror software

■Kernel: From the kernel software

Kernel messages might not be printed on the screen but are usually written to /var/opt/SUNWesm/ds.log or to the system console and recorded in

/var/adm/messages.

TABLE 3-1Error Messages for the Sun StorEdge Availability Suite 3.2 Software

Error Message							From	Meaning
'%s' is		not	a	valid		number	PITC	iiadm was expecting a number to be on the command
								line. This happens when the copy parameters option (-
								P) is used but the arguments for units and delay are
								not valid numbers.
-C	<ctag>	does		not	match disk group		PITC	iiadm determined that the cluster resource group that
								contains the volumes does not match the cluster tag
								given as an argument to the -Coption.
-C	is valid		only		in	a Sun Cluster	PITC	The user attempted to specify a cluster tag when not in
								a cluster.

19