Chapter 6: HSIM-W6 Configuration with QuickSET

Advanced IP Routing Settings

This section describes the fields for the Advanced IP Routing Settings of the Advanced Routing configuration window.

Interface # — Displays the active interface number.

Local WAN IP Address — Set this value only if you are going to use Numbered mode. In Numbered mode, the Local WAN IP address is the IP address of the WAN link leading to the Telco Cloud. A subnet mask for this IP address is required before you can use this link.

Subnet Mask — Displays the subnet mask for the Local WAN IP address.

Modify — Use this button to change an entry in the Advanced IP Routing Settings section. Select the interface number to modify by clicking on the tab to the left of the interface number.

Advanced IP Routing Options

This section describes the fields for the Advanced IP Routing Options of the Advanced Routing configuration window.

Enable RIP — Selecting this function enables the sending and receiving of Routing Information Protocol packets. Routing Information Protocol is used in IP for broadcasting open path information between routers to keep routing tables current.

Redirector Window

The Redirector window shown in Figure 38 displays after clicking on the Redirector... button in the Advanced Routing configuration window. The Redirector window is used to set up an IP address for a remote Dynamic Host Configuration Protocol (DHCP) server.

Figure 38 Redirector Window

HSIM-W6 User’s Guide 101

Page 115
Image 115
Cabletron Systems HSIM-W6 manual Advanced IP Routing Settings