Cabletron Systems HSIM-W6 manual IP General Config Screen, IP General Configuration Status Fields

Chapter 7: General Configuration Using Local Management

IP General Config Screen

The IP General Config screen allows you to configure the HSIM-W6 for IP routing.

Access the IP General Config screen by using the arrow keys to highlight the IP General Config option and then pressing ENTER. The IP General Config screen shown in Figure 61 displays.

HSIM-W6 Local Management					Flash Image Version XX.XX.XX
				IP General Config
Router Name: IP		Status: Enabled			UpTime: 0 days 0 hours 39 min
Version: XX.XX.XX		AdminStatusTime:		0 days 0 hours 39 min
				System Level Setup
IP Routing:	ENABLED		Server:	0.0.0.0	37 of 999
Redirector:	FORWARD		UDP Port:	37	UDP Type: time
				Port Level Setup
Port: 1	Description: Ctron HSIM-W6 EnetPort
MAC Address: 00-00-1D-22-46-B0				Interf. Type: ethernet-csmacd
Oper Status:	Enabled			Framing: Ethernet	MTU: 1500
Address: 134.141.17.177			Mask: 255.255.0.0		Address Type: Primary
	Network Bcast: Ones
IP Routing: ENABLED			IP Forwarding: ENABLED		Proxy ARP: DISABLED
+PORT-		+REDIRECTOR-		SAVE	RETURN

2012_11

Figure 61 IP General Config Screen

IP General Configuration Status Fields

The following list describes each of the IP General Configuration status fields. The status fields are for informational purposes only and cannot be modified.

Router Name — Displays the type of routing used.

Status — Displays the status of IP Routing.

UpTime — Displays the amount of time elapsed since the last time the HSIM-W6 was rebooted.

Version — Displays the IP Routing version number used on the HSIM-W6.

144 HSIM-W6 User’s Guide