Chapter 7: General Configuration Using Local Management

To enable SAP Routing, complete the following steps:

1.From the IPX Configuration screen, highlight IPX SAP and then press ENTER. The IPX SAP SETUP screen, shown in Figure 66, displays.

2.Use the arrow keys to highlight the Port field.

3.Type in the number of the port that you wish to enable SAP routing, then press ENTER.

4.Use the arrow keys to highlight the Port Level SAP field.

5.Use the ENTER key to toggle the entry to ENABLED.

6.Use the arrow keys to highlight the SAVE command at the bottom of the screen, and then press ENTER. The message “SAVED OK” displays.

HSIM-W6 Local Management

Flash Image Version XX.XX.XX

IPX SAP CONFIGURATION

 

IPX Address: xxx.xxx.xxx.xxx

 

Port: 1

 

System Level SAP:

DISABLED

Port Level SAP:

DISABLED

+PORT-

SAVE

RETURN

Figure 66 IPX SAP Configuration Screen

HSIM-W6 User’s Guide 161

Page 175
Image 175
Cabletron Systems HSIM-W6 manual IPX SAP Configuration Screen