Cabletron Systems HSIM-W6 manual WAN Interface Configuration Screen

Chapter 7: General Configuration Using Local Management

WAN Interface Configuration Screen

To access the WAN Interface Configuration screen shown in Figure 69, use the arrow keys to highlight the WAN INT CONFIG selection at the bottom of the WAN Physical Configuration screen, then press ENTER.

Local Management Flash Image Version: xx.xx.xx

WAN INTERFACE CONFIGURATION

Interface Number:	[002]
Max Xmit Unit:	0
Line Coding:	[NONE]
Active Protocol:	[NONE]

PORTS:

SAVE [xx-xxx] RETURN

PT#	IF#	LID	STATE	PT# IF# LID STATE
001	001	Enet	UP	017
002				018
003				019
004				020
005				021
006				022
007				023
008				024
009				025
010				026
011				027
012				028
013				029
014
				030
015
				031
016				032

1484_04

Figure 69 WAN Interface Configuration Screen

WAN Interface Configuration Screen Fields

This section describes the WAN Interface Configuration screen fields.

Interface Number — Displays the active Interface Number. Use this field to configure the Interface Numbers assigned on the WAN Physical Configuration screen.

Max Xmit Unit — User-configured field that displays the maximum packet size that can be transmitted on the selected Interface. The default values are 8191 for PPP and 4095 for Frame Relay.

166 HSIM-W6 User’s Guide