Cabletron Systems HSIM-W6 manual Wide Area Hdsl Configuration Window

Chapter 6: HSIM-W6 Configuration with QuickSET

Wide Area HDSL Configuration Window

The Wide Area HDSL configuration window shown in Figure 27 displays after clicking on the Next>> button in either the HSIM configuration window or the Wide Area (Frame Relay-HDSL or PPP-HDSL) configuration window, depending on whether you have installed one or two WPIMs in the HSIM-W6, and the order that you are configuring them.

This section explains how to configure the HSIM-W6 Wide Area HDSL port using QuickSET.

NOTE

Figure 27 Wide Area HDSL Configuration Window

The wiring provider (i.e., Internet Service Provider (ISP) contractor, etc.) determines the settings for Table 18. Consult the service provider for the correct settings.

80 HSIM-W6 User’s Guide