Cabletron Systems HSIM-W6 manual Netstat, Ping

	Chapter 8: MIB Navigator
netstat:
Syntax:	netstat <option>
Description:	The netstat command provides a display of general network statistics for
	the managed device. The netstat command must be used with one of the
	two display options.
Options:	-iDisplays status and capability information for each interface
	-rDisplays routing information for each interface

Example:

	MIBNav->netstat -i
	Interface + Description		MTU	Speed	Admin	Oper	MAC Addr
	# 1	(ethernet -csmacd)	1514	10000000	up	up	0x00 0x00 0x1d 0x07 0x50 0x0e
	# 2	(ethernet - csmacd)	1514	10000000	up	up	0x00 0x00 0x1d 0x07 0x50 0x0f
	# 3	(ethernet - csmacd)	1514	10000000	up	up	0x00 0x00 0x1d 0x07 0x50 0x10
	# 4	(ethernet - csmacd)	1514	10000000	up	up	0x00 0x00 0x1d 0x07 0x50 0x11
	MIBNav->netstat -r
	Destination		Next-hop		Interface
	# Default Route		DirectConnection		1
	# 134.141.0.0		DirectConnection		2
	# 134.141.0.0		DirectConnection		3
							051470
ping:
Syntax:		ping [IP address]
Description:		The ping command generates an outbound ping request to check the
		status (alive/not alive) of a device at a specified IP address.
Options:		Not Applicable
Example:

MIBNav->ping 122.144.40.10

122.144.40.10 is alive

051471

HSIM-W6 User’s Guide187