Cabletron Systems HSIM-W6 manual Wide Area E1 Configuration Window

Chapter 6: HSIM-W6 Configuration with QuickSET

Wide Area E1 Configuration Window

The Wide Area E1 configuration window shown in Figure 23 displays after clicking on the Next>> button in either the HSIM configuration window or the Wide Area (Frame Relay or PPP) configuration window, depending on whether you have installed one or two WPIMs in the HSIM-W6, and the order that you are configuring them.

This section explains how to configure the HSIM-W6 E1 WAN port using QuickSET.

NOTE

Figure 23 Wide Area E1 Configuration Window

The service provider (i.e., AT&T, Sprint, MCI, etc.) determines the settings for the following fields. Consult the service provider for the correct settings.

70 HSIM-W6 User’s Guide