Cabletron Systems manual HSIM-W6 Configuration with QuickSET

Chapter 6: HSIM-W6 Configuration with QuickSET

If you have leased a portion of a fractional line (T1 or E1), the service provider tells you which Time Slots are allocated for your use. In this case select only those Time Slots.

NOTE

If you are configuring a WPIM-DI Time Slot table, any available Time Slots that are not checked are mapped to the DI Interface. In other words, if you lease an entire T1 line, any Time Slots that are not selected in the Time Slot configuration window are used by the device connected to the DI interface.

Once the Frame Relay Time Slot configuration is complete, click on Next>> in the Frame Relay Time Slot configuration window and proceed to the Bridging and Routing Configuration section.

HSIM-W6 User’s Guide 83