HP MFP Sending Software 4.9X manual 15Addressing subtab Configure Devices tab set, Ldap Step

Addressing subtab

Figure 3-22Addressing subtab on the Device Configuration tab set

1

2

3

4

5

6

Table 3-15Addressing subtab — Configure Devices tab set

Callout Component Description

1Enable Network Contacts Click to select Enable Network Contacts (use LDAP server) check box,

(use LDAP server) and then follow the steps below.

2Network Directory Server Use the following controls to designate the LDAP server.

(LDAP) (Step 1)

●Type the hostname or IP address in the LDAP Server Address text box or click AutoFind to have DSS find the LDAP server address.

●Click to select the Use a secure connection (SSL) check box.

●Tye the port number in the Port text box.

3Server Authentication Click to select one of the following options.

Requirements (Step 2)

●Server does not require authentication.

●Server requires authentication.

60 Chapter 3 Installation and configuration ENWW