HP MFP Sending Software 4.9X manual Configure DSS for Windows Active Directory Services

Other e-mail settings could include but not limited to the following:

●iPlanet: (!(objectclass=groupofuniquenames))

●Active Directory: (!(objectclass=group))

6.Click Apply.

Configure DSS for Windows Active Directory Services

You must install the Digital Sending Software and ensure that the Digital Sending Service is running before you can configure the software for the Windows Active Directory environment.

Configure Authentication

Follow these steps to configure Authentication for the Windows Active Directory environment.

1.Open the DSS Configuration Utility and click on the Authentication tab.

2.Click to select the Enable Authentication check box, and then select Microsoft Windows from the Authentication Method drop-down menu.

Figure 3-47Authentication tab

3.Type in the domain name in the Trusted Domains text box, and then click Add.

4.In the Test Windows Sign In section, select the domain from the Domain drop-down menu, and then type in the username and password for an authenticated user in the Username and Password text boxes. Click Test to test the credentials.

5.Click Apply.

ENWW Configuration 111