HP MFP Sending Software 4.9X manual Configure the e-mail feature on DSS

Configure the e-mail feature on DSS

1.On the DSS server, open the Configuration Utility and click the E-mailtab. Figure 3-28The E-mailtab

2.Click Add. The Add SMTP Gateway dialog box appears.

3.Type the host name or TCP/IP address of the SMTP server in the Server Name or Address field.

-or-

Or click Auto Find to find all of the SMTP servers on the network. A list of SMTP servers appears. Select one or more SMTP servers and click OK.

4.Select any of the following additional SMTP gateway options:

●Enable SMTP SSL Protocol

●Server Requires Authentication

●Split e-mails if larger than (MB). Use this control to set a maximum file size for the specified SMTP gateway. If an e-mail attachment exceeds the specified file size, the attachment is divided into two or more smaller attachments.

●Send a test e-mail to. Type an e-mail address and then click Send to verify the presence of the SMTP gateway.

NOTE: If the test fails, double-check the gateway address and then contact the network administrator to see if the SMTP server is functioning. See Verifying the SMTP gateway on page 70.

ENWW Configuration 69