Cabletron Systems HSIM-W6 manual NAT Settings Configuration Window

Chapter 6: HSIM-W6 Configuration with QuickSET

NAT Settings Configuration Window

The Network Address Translation (NAT) Settings configuration window shown in Figure 40 displays after clicking on the NAT Settings... button in the Advanced Routing configuration window. The NAT Settings configuration window is used to set up Network Address Translation on your Ethernet port.

Figure 40 NAT Settings Configuration Window

The following definitions explain the fields in the NAT Settings configuration window:

Ethernet address translation to Interface # — Allows you to set up NAT on your Ethernet port. The pull-down menu is used to disable (OFF) or enable NAT. To enable NAT, click the pull-down menu button and enter an interface number to run NAT through.

Add Proxy... — Allows you to add NAT proxy servers. Click the Add Proxy... button and a Add NAT Proxy Server window (Figure 41) will display. Enter an IP address, and select a Port number/type and a Protocol for each server entry.

104 HSIM-W6 User’s Guide