Cabletron Systems HSIM-W6 manual Network Information Diagrams, Network Information Layout

Chapter 4: Planning for HSIM-W6 ISDN Configuration

Network Information Diagrams

It is helpful to draw a diagram including all locations, addresses, router names, etc. This section includes diagrams needed to configure the HSIM-W6. You may need different addressing information depending on whether you are configuring IP routing and/or NetWare IPX routing.

NOTE

The diagrams show the information required to configure only the HSIM-W6. If you need to configure both ends of the WAN link, you should label all information for the network.

TCP/IP Routing — An IP address and subnet mask are required for the Ethernet LAN for the router connection. Each remote router ISDN WAN link may have local and remote IP addresses and subnet masks depending on the type of IP addressing as shown in Figure 5. The IP routing table in the HSIM-W6 can be “seeded” with addressing information for networks/stations beyond the remote router.

NETWORK INFORMATION LAYOUT

	ETHERNET LAN
PC	IP ADDRESS
	SUBNET MASK
	GATEWAY

HSIM-W6

SYSTEM NAME

MESSAGE PAP/CHAP

PASSWORD

CSX200 WAN IP ADDRESS SUBNET MASK (IF REQUIRED)

ISDN LINE SWITCH TYPE SPIDs, DNs

ISDN

REMOTE ROUTER

WAN IP ADDRESS

SUBNET MASK

(IF REQUIRED) REMOTE ISDN PHONE NUMBERS

REMOTE ROUTER

ROUTER NAME

PAP/CHAP PASSWORD

REMOTE LAN NETWORK IP ADDRESSES SUBNET MASKS METRICS

100_10

NETWORK AND STATIONS BEYOND

THE REMOTE ROUTER

Figure 5 Network Information Layout

32 HSIM-W6 User’s Guide