6 HSIM-W6 Configuration with QuickSET

This chapter provides step-by-step instructions for configuring the HSIM-W6 through the use of QuickSET.

\

NOTE

Before configuring the device, you must set up your computer based on theREAD ME FIRST! documentation included with the product and installed the HSIM-W6 based on the QuickSTART Guide located in the QuickSET CD case.

The HSIM-W6 must have at least one WPIM installed before you can begin configuring the device.

Normally, QuickSET automatically establishes a communication link with the HSIM-W6 being configured. However, under certain circumstances, QuickSET may not be able to automatically locate the HSIM-W6. In this case, the window shown in Figure 16 displays:

Figure 16 IP Address Window

Enter the IP address of the HSIM-W6 in the appropriate field and the password if applicable (the default password is public). Click on the OK button and QuickSET should now locate the HSIM-W6 on the network and display the First Introductory window shown in Figure 17.

HSIM-W6 User’s Guide 59

Page 73
Image 73
Cabletron Systems manual HSIM-W6 Configuration with QuickSET